Electronic Digital Caliper




1. Technical Specifications of Electronic Digital Caliper

Measuring Range:0-150MM/0-6IN,0-200MM/0.8IN
Resolution0.01MM/0.0005IN
Accuracy
±0.02MM/0.001IN(＜100MM)
±0.03MM/0.001IN(＞100-200MM)
Repeatability0.01MM/0.0005IN
Max Measuring Speed1.5M/Sec, 60IN/SEC
Measuring SystemLinear Capacitive Measuring System
DisplayLCD display
Power:
One Alkaline Lithium Button Cell Battery 1.5V
,Type LR44 Capacity-180MAH
Working Temperature5℃-40℃/41 to 104 Degree F
Note:Accuracy affected in environements exceeding 80% relative humidity
2. Application of Electronic Digital Caliper
1)Operation: Slider can be removed only after the locking screw(#10) is loosened
2)Basic Measuring Methods
a: loosen the locking screw
b: press "on" button, select sae or metric measurement bypressing "MM/INCH" Button.
 pressing "MM/INCH" button after measurement will display the sae/metric conversion
c: to reset display to zero, close external measuring jaws,then press"zero" button.
3. Maintenance Instructions of  Electronic Digital Caliper
  1. Keep the caliper clean and dry(liquid can damage the slider)
  2. use a clean, dry cloth to clean all surfaces-do not use solvents or slvent based cleaners
  3. to save power , turn off the unit when not in use
  4. avoid contact with electrocy and or electronic devices
  5. 4 .Details show of Electronic Digital Caliper


  7. 5. Battery replacement of Electronic Digital Caliper
Flashing display indicates low battery. To replace battery, remove battery cover by sliding cover in the direction indicated and replace battery with positive side facing out.
6. Trouble shooting of  Electronic Digital Caliper
FaliureCauseMeasure
Display FlashesLow batteryReplace battery
Display does not change when slider is movedsystem lockedremove battery and replace after 30 seconds to reset system
Accuracy less than ±0.001MMDirt in the sensorRemove slider cover and its assembly, clean with compressed air 5KG/CM2
No display on LCD
1.Improper battery position
2.Low battery
1.Remove battery cover and check battery position
2.Replace Battery

7. Shipment of Electronic Digital Caliper


Contact with us 



评论

发表评论

此博客中的热门博文

Deep Foundation Types And Introduction

图片
Deep Foundation Types And Introduction Deep Foundations In case, the strata of good bearing capacity is not available near the ground, the foundation of the structure has to be taken deep with the purpose of attaining a bearing stratum which is suitable in all respects.In addition there may be many other conditions which may require deep foundations for ensuring stability and durability of a structure. For example, the foundation for a bridge pier must be placed below the scour depth, although suitable bearing stratum may exist at a higher level. The most common forms of construction pertaining to deep foundations are 1) Piles 2) Caissons 3) Basement or Hollow Box Foundation Piles A pile is basically a long cylinder of a strong material such as concrete that is pushed into the ground to act as a steady support for structures built on top of it. Pile foundation is required when the soil bearing capacity is not sufficient for the structure to withstand. This is due to ...
阅读全文

New shipment for the YFD-300 Ultrasonic Flaw Detector

图片
1.Features of YFD-300 Ultrasonic Flaw Detector 1.Automated calibration of transducer Zero Offset and/or Velocity ; 2.Automated gain,Peak Hold and Peak Memory; 3.Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,Diameter); 4.Automated switch three staff gauge ((Depth d,level p,distance s); 5.500 independence setup, any criterion can be input freely, we can work in the scene without test block; 6.Big memory of 1000 A graph. 7.Gate and DAC alarm;Acoustic-Optical alarm; 8.RS232/USB port,communication with pc is easy; 9.The embeded software can be online updated; 10.Li battery, continue working time up to 10 hours; 11.Display freeze; 12.Automated echo degree; 13.Angles and K-value;   14.Lock and unlock function of system parameters; 15.AWS D1.1; 16.Dormancy and screen savers;    17.Electronic clock calendar ;  18.Automated make video of test process and play; Connect the Upan,the length...
阅读全文