TF Series Metal Tube Float Flowmeters

1.Measuring Principle of TF Series Metal Tube Float Flowmeters 
TF Series Metal Tube Float Flowmeters are principally composed of two major parts: sensor and indicator. The sensor mainly consists of the joint flange, cone, float as well as upper and lower guiders; while, the indicator mainly consists of the casing, magnetic transmission system, dial scale and electric transmission system. 
2.Functional Features of TF Series Metal Tube Float Flowmeters 
1.Designed for measurement of small caliber and low-speed medium 
2.With reliable performance, few maintenance and long service life 
3.Low requirement for the straight tube section 
4.Widely measure ratio: 10:1 
5.Dual-line display, instantaneous/ cumulative flow rates displayed at the field
6.With a keyboard on the indictor for convenient operation and setting
7.All in metal construction, designed for measuring corrosive medium of high temperature, high pressure and strong 
8.Non-contact magnetic coupling transmission 
9.Applicable for inflammable and explosive occasion 
10.Optional charging modes: DC power supply or battery power
11.With the functions of data recovery, data backup and power failure protection
12.Multiple parameters calibrating function  
3.Technical parameter of TF Series Metal Tube Float Flowmeters
4.Details show of TF Series Metal Tube Float Flowmeters
5 .Our workshop and the stock
6.Contact with us


评论

发表评论

此博客中的热门博文

Deep Foundation Types And Introduction

图片
Deep Foundation Types And Introduction Deep Foundations In case, the strata of good bearing capacity is not available near the ground, the foundation of the structure has to be taken deep with the purpose of attaining a bearing stratum which is suitable in all respects.In addition there may be many other conditions which may require deep foundations for ensuring stability and durability of a structure. For example, the foundation for a bridge pier must be placed below the scour depth, although suitable bearing stratum may exist at a higher level. The most common forms of construction pertaining to deep foundations are 1) Piles 2) Caissons 3) Basement or Hollow Box Foundation Piles A pile is basically a long cylinder of a strong material such as concrete that is pushed into the ground to act as a steady support for structures built on top of it. Pile foundation is required when the soil bearing capacity is not sufficient for the structure to withstand. This is due to ...
阅读全文

New shipment for the YFD-300 Ultrasonic Flaw Detector

图片
1.Features of YFD-300 Ultrasonic Flaw Detector 1.Automated calibration of transducer Zero Offset and/or Velocity ; 2.Automated gain,Peak Hold and Peak Memory; 3.Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,Diameter); 4.Automated switch three staff gauge ((Depth d,level p,distance s); 5.500 independence setup, any criterion can be input freely, we can work in the scene without test block; 6.Big memory of 1000 A graph. 7.Gate and DAC alarm;Acoustic-Optical alarm; 8.RS232/USB port,communication with pc is easy; 9.The embeded software can be online updated; 10.Li battery, continue working time up to 10 hours; 11.Display freeze; 12.Automated echo degree; 13.Angles and K-value;   14.Lock and unlock function of system parameters; 15.AWS D1.1; 16.Dormancy and screen savers;    17.Electronic clock calendar ;  18.Automated make video of test process and play; Connect the Upan,the length...
阅读全文