SRT-6200 Surface Roughness Tester

1.Featues of Surface Roughness Tester 
* Be compatible with four standards of ISO, DIN, ANSI and JIS.
* Multiple parameter measurement: Ra, Rz.
* Highly sophisticated inductance sensor.
* Built-in lithium ion rechargeable battery and control circuit with high capacity.
* Small in size, light in weight and easy to use.
* Manual or automatic shut down.
* Metric /Imperial Conversion.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
2. Principle of Surface Roughness Tester
When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
3. Specification of Surface Roughness Tester
4. Details show of Surface Roughness Tester
5. Shipment of Surface Roughness Tester
6.Contact with us

评论

发表评论

此博客中的热门博文

Deep Foundation Types And Introduction

图片
Deep Foundation Types And Introduction Deep Foundations In case, the strata of good bearing capacity is not available near the ground, the foundation of the structure has to be taken deep with the purpose of attaining a bearing stratum which is suitable in all respects.In addition there may be many other conditions which may require deep foundations for ensuring stability and durability of a structure. For example, the foundation for a bridge pier must be placed below the scour depth, although suitable bearing stratum may exist at a higher level. The most common forms of construction pertaining to deep foundations are 1) Piles 2) Caissons 3) Basement or Hollow Box Foundation Piles A pile is basically a long cylinder of a strong material such as concrete that is pushed into the ground to act as a steady support for structures built on top of it. Pile foundation is required when the soil bearing capacity is not sufficient for the structure to withstand. This is due to ...
阅读全文

New shipment for the YFD-300 Ultrasonic Flaw Detector

图片
1.Features of YFD-300 Ultrasonic Flaw Detector 1.Automated calibration of transducer Zero Offset and/or Velocity ; 2.Automated gain,Peak Hold and Peak Memory; 3.Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,Diameter); 4.Automated switch three staff gauge ((Depth d,level p,distance s); 5.500 independence setup, any criterion can be input freely, we can work in the scene without test block; 6.Big memory of 1000 A graph. 7.Gate and DAC alarm;Acoustic-Optical alarm; 8.RS232/USB port,communication with pc is easy; 9.The embeded software can be online updated; 10.Li battery, continue working time up to 10 hours; 11.Display freeze; 12.Automated echo degree; 13.Angles and K-value;   14.Lock and unlock function of system parameters; 15.AWS D1.1; 16.Dormancy and screen savers;    17.Electronic clock calendar ;  18.Automated make video of test process and play; Connect the Upan,the length...
阅读全文