HM-6560 hardness tester

1 Features and Specifications of HM-6560 hardness tester
1.1 Typical Applications
* Die cavity of molds
* Inspection of bearing and other mass produced parts on a production line
* Failure analysis of pressure vessel, steam generator and other equipment
* Inspection of installed machinery, permanent parts of assembled systems and heavy work pieces.
* Testing surface of a small hollow space
* Material identification in the warehouse of metallic materials
* Rapid testing in large range and multi-measuring areas for large-scale work piece
1.2 Testing Features of HM-6560 hardness tester
* Palm size for narrow space.
*Test at any angle, even upside down.
*Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
*Large memory could store 250 groups including single measured value, impact direction, material and hardness scale etc.
*User recalibration function allowed.
*Can communicate with PC computer for statistics and printing by the optional cable.
*Manual or automatic shut down.
*Low battery indication.
1.3 Testing Features of HM-6560 hardness tester
Display: 12.5mm LCD with back light
Accuracy: Display error ±0.8% at LD=900Measuring range: 200-900L Conversion: HL-HRC-HRB-HB-HV-HSD
Materials: 9 different common materials
With RS232C interface
Memory:250 data can be stored and re-readable 
Impact device: D Will handle the majority of hardness testing applications.
Weight: 75g
Power supply: 2x1.5V AAA size battery
Dimension: 146×65×36mm
Weight: 130g (not including batteries)
Working temperature： -10℃～＋50℃
Storage temperature：-30℃～＋60℃;
Relative humidity: ≤90％1
1.4 Details show of HM-6560 hardness tester
1.5 Related product
Contact with us


评论

发表评论

此博客中的热门博文

Deep Foundation Types And Introduction

图片
Deep Foundation Types And Introduction Deep Foundations In case, the strata of good bearing capacity is not available near the ground, the foundation of the structure has to be taken deep with the purpose of attaining a bearing stratum which is suitable in all respects.In addition there may be many other conditions which may require deep foundations for ensuring stability and durability of a structure. For example, the foundation for a bridge pier must be placed below the scour depth, although suitable bearing stratum may exist at a higher level. The most common forms of construction pertaining to deep foundations are 1) Piles 2) Caissons 3) Basement or Hollow Box Foundation Piles A pile is basically a long cylinder of a strong material such as concrete that is pushed into the ground to act as a steady support for structures built on top of it. Pile foundation is required when the soil bearing capacity is not sufficient for the structure to withstand. This is due to ...
阅读全文

New shipment for DN65mm electromagnetic flow meter

图片
1.1 Preface TEM82E series electromagnetic flowmeters follow the Faraday law of electromagnetic induction. They can be used to accurately measure the flow rate of liquids which are electrical conducting, caustic, and mixed with liquids and solids. They are widely used throughout industries of petroleum, chemical engineering, pharmacology, papermaking, electric power, environmental protection and so forth. 1.2 Features: 1.Highly intelligentized   2.Muti- electrode structure  3.High accurancy  4.No moving parts  5.Wide operating rang e  6.No obstruction to the flow 7.Variety of flange types available      8.Different exicitation frequencies  9.Able to detect two-way  10.Capacitive empty and full pipe measurement technique 11.Lightning protection and anti-jamming circuit design 12.Have Eprom 1.3 Specifications: 1.4 Product Details 1.4 Flow Range Table 1.5 How to Choose liner ...
阅读全文

New shipment for the electromagnetic flow transmitter,remote display

图片
1.Intoduction of Electromanetic flow meter conveter Electronic flow transmitter is parts of electromagnetic flow meter.According to the size of the sensor, we offer four kinds of transmitter housing, As shown in the figure below, please note: the PCB board, software and menus and functions are be the same, only the size of housing and shape of the housing is different. 2. Technical information of Electromagnetic Flow Converter 3. Electromagnetic Flow Converter Suitable to Size of the (mm） 1，2，3、6、8，10、15、20、25、32、40、50、65、80、100、125、150、200、250、300、350、400、450、500、600、650，700、800、900、1000、1100，1200、1300，1400、1500，1600、1700，1800、2000、2200、2400、2600、2800、3000 4. Power Supply of Electromagnetic Flow Converter Power supply ：85VAC --- 265VAC or or 110VAC to 420VAC or 24VDC or 3.6v lithium battery 5. Details show of the Electromagnetic Flow Converter 6.Dimension of Electromagnetic Flow Converter 7 .Shipment of Electromagnetic Flow Con...
阅读全文