Dalian Tmeasurement

1.Features of YFD-300 Ultrasonic Flaw Detector 1.Automated calibration of transducer Zero Offset and/or Velocity ; 2.Automated gain,Peak Hold and Peak Memory; 3.Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,Diameter); 4.Automated switch three staff gauge ((Depth d,level p,distance s); 5.500 independence setup, any criterion can be input freely, we can work in the scene without test block; 6.Big memory of 1000 A graph. 7.Gate and DAC alarm;Acoustic-Optical alarm; 8.RS232/USB port,communication with pc is easy; 9.The embeded software can be online updated; 10.Li battery, continue working time up to 10 hours; 11.Display freeze; 12.Automated echo degree; 13.Angles and K-value;   14.Lock and unlock function of system parameters; 15.AWS D1.1; 16.Dormancy and screen savers;    17.Electronic clock calendar ;  18.Automated make video of test process and play; Connect the Upan,the length...

1.Features of TEM82E electromagnetic flow meter ,Magnetic flow meter 2.Details show of the TEM82E electromagnetic flow meter  3.Specification of of the TEM82E electromagnetic flow meter  4.Display of of the TEM82E electromagnetic flow meter  5.Liner of the TEM82E electromagnetic flow meter  6.Shipment of the electromagnetic flow meter  7.Contact with us

1. Use a grinding stone to smoothen the test surface 2. Perform a few test impacts with the rebound hammer on this smooth, hard surface before taking any measurements which you are going to evaluate. Perform a consistency check on the test anvil 3.Ensure all settings are correctly done. 4 Position the hammer perpendicular to and against the test surface. Push the concrete test hammer adainst the surface at a moderate spped until the impact is triggered. Bes aware that the plunger generates a recoil when it deploys. Therefore it is recommentded to hold the rebound hammer with both hands, perpendicular to the test surface, before triggering the impact. 5. Each test surface should be tested with at least 12 impacts dropping the highest and the lowest and then take the average of the remaining. The individual impact points must be spaced at least 25mm apart. 6. Interpret the test results.

1. Specification 2. Product Details 3. Screen Display 4. Accessories 5. Packing List 6. Related product 7.Contact with us

1. Principle of 702 Guided Wave Radar Level Meter  Guided wave radar is measuring instrument based on the principle of time travel, the radar waves travel at the speed of light, the running time can be through the electronic components are converted into level signals. Probe a high frequency pulse and along the cable or rod probe propagation, when pulse meets the material surface is reflected back by the receiver instrument within the receiving and the distance signal into a signal.  2.Feature of 702 Guided Wave Radar Level Meter  Suitable for Medium: Liquid and solid powder Explosion-proof Grade: Exia IIC T6 Ga / Exd IIC T6 Ga  Measuring Range: 30m liquid; 15m solid  Aerials: Single cable or single rod antenna Measurement Precision: ±3mm  Frequency: 500MHz-1.8GHz Temperature: (-40 ~ 250) ℃ Process Pressure: (-0.1 ~ 4) MPa The signal Output: (4 ~ 20) mA/HART  The Scene Display: Four LCD Power Source: Tw...

Really appreciated our customer send me the photo for site application of our TDS-100F series wall mounted ultrasonic flow meter~ Then I would like share with all of you.~ 1.Preface of TDS-100F wall mounted ultrasonic flow meter TDS-100F is a fixed mounted ultrasonic flow meter, and can operate with all our instruments transducer. Their electronic enclosures are rated as IP65,thus, can be installed for both indoor and outdoor.  2.Features of TDS-100F wall mounted ultrasonic flow meter 1.Better than 1% accuracy 2.0.2% of repeatability  3.2x20 English letters LCD display 4.4x4 key tactile-feedback membrane keypad  5.85~264VAC or 24VDC power supply  6.Pipe diameters from 15mm to 6000mm   7.Operate with clamp on, insertion and flow-cell transducer   8.Five channel analogue 4-20mA input. (version 7)  9.One channel programmable 4-20mA output  10.Two channel programmable digital out (isolated OCT and Relay) 11.Freq...