Dalian Tmeasurement

1.ZBL-R660 Concrete Rebar Scanner Introduction ZBL-R660 is mainly used to test the reinforced concrete structure and is capable cover thickness and rebar diameter on the reinforced concrete surface. 2.ZBL-R660 Concrete Rebar Scanner Features 1. With multi-coil technology, the rebar position can be located more real-time and accurately; 2.Rebar position, spacing and cover thickness are displayed on the same screen 3. USB data transmission 4.Up to 65m for profile and grid scan modes and up to 10m for signal scan mode; 5.Two data view modes: graph and list, which enables convenient and flexible operation as well as quick view of the data; 6.Bluetooth data transmission 7.Five scan modes are provided to suit for different measuring environment 3.ZBL-R660 Concrete Rebar ScannerTechnical Information 4.Detail show of ZBL-R660 Concrete Rebar Scanner 5.ZBL-R660 Concrete Scanner Rebar Scanner Screeen Display 6.ZBL-R660 Concrete Rebar Scanner Application

1.Technical information of HT -225 concrete test hammer 2.Specification details of HT -225 concrete test hammer 3.How to use f HT -225 concrete test hammer 1. Use a grinding stone to smoothen the test surface 2. Perform a few test impacts with the rebound hammer on this smooth, hard surface before taking any measurements which you are going to evaluate. Perform a consistency check on the test anvil 3.Ensure all settings are correctly done. 4 Position the hammer perpendicular to and against the test surface. Push the concrete test hammer adainst the surface at a moderate spped until the impact is triggered. Bes aware that the plunger generates a recoil when it deploys. Therefore it is recommentded to hold the rebound hammer with both hands, perpendicular to the test surface, before triggering the impact. 5. Each test surface should be tested with at least 12 impacts dropping the highest and the lowest and then take the average of the remaining. The individual impa

1.Features of TEM82E electromagnetic flow meter ,Magnetic flow meter 2.Details show of the TEM82E electromagnetic flow meter  3.Specification of of the TEM82E electromagnetic flow meter  4.Display of of the TEM82E electromagnetic flow meter  5.Liner of the TEM82E electromagnetic flow meter  6.Shipment of the electromagnetic flow meter  7.Contact with us

TM-8812 thickness gauge Thickness gauge is a important tool for the flow measurement .Cause the pipe thickness is a necessary step for the parameter setting of flow meter 1.Features Model:TM8812 2. Measuring range (metric/imperial): 1.2-225mm,0.05-9inch 3. Operating principle: ULTRASONIC 4. Sound velocity: 500-9000m/s 5. Lower limit steel pipes: ф15x2.0mm, ф20x3.0mm determined by the transducer 6. Calibration block: included 7. Resolution: 0.1mm 8. Accuracy: ±(0.5%n+0.1) 9. RS232C interface: with RS232C  10. Power supply: 4x1.5V AAA (UM-4)battery 11. Battery indicator: low battery indicator 12. Operating conditions:0-+45℃(32℉-104℉),≤90%RH 13. Dimensions: 120x62x30mm 14. Weight: 164g (not including battery) 2.Technical Information 3.Details show 4. Match with ultrasonic flow meter for application 5. Accessories 6. Related product Contact with us

1.1 Preface TDS-100F is a fixed mounted ultrasonic flow meter, and can operate with all our instruments transducer. Their electronic enclosures are rated as IP65,thus, can be installed for both indoor and outdoor.  1.2.Features: 1.Better than 1% accuracy 2.0.2% of repeatability  3.2x20 English letters LCD display 4.4x4 key tactile-feedback membrane keypad  5.85~264VAC or 24VDC power supply  6.Pipe diameters from 15mm to 6000mm   7.Operate with clamp on, insertion and flow-cell transducer   8.Five channel analogue 4-20mA input. (version 7)  9.One channel programmable 4-20mA output  10.Two channel programmable digital out (isolated OCT and Relay) 11.Frequency output  12.IP65 1.3 Specification 1.4.Transducer 1.4.Product Details 1.5.Accessories 1.6 Factory Picture 1.7 Warranty 1.    We offer 12 Month's Warranty on all product ,free of charge ,but the user should be responsible for one -way transportation fee from the customer to

1.1 Preface TDS-100F is a fixed mounted ultrasonic flow meter, and can operate with all our instruments transducer. Their electronic enclosures are rated as IP65,thus, can be installed for both indoor and outdoor.  1.2.Features: 1.Better than 1% accuracy 2.0.2% of repeatability  3.2x20 English letters LCD display 4.4x4 key tactile-feedback membrane keypad  5.85~264VAC or 24VDC power supply  6.Pipe diameters from 15mm to 6000mm   7.Operate with clamp on, insertion and flow-cell transducer   8.Five channel analogue 4-20mA input. (version 7)  9.One channel programmable 4-20mA output  10.Two channel programmable digital out (isolated OCT and Relay) 11.Frequency output  12.IP65 1.3 Specification 1.4.Transducer 1.4.Product Details 1.5.Accessories 1.6 Factory Picture 1.7 Warranty 1.    We offer 12 Month's Warranty on all product ,free of charge ,but the user should be responsible for one -way transportation fee from the customer t